KZ - Bluetooth 5.0 Cable

COMPATIBLE PRODUCTS - ZSN/ ZSN PRO/ ZSN PRO X/ ZS10 PRO/ AS16/ AS12/ ZSX/ DQ6
NOT COMPATIBLE PRODUCTS - ZST/ ZSR/ ED12/ ES3/ ES4/ ZS10/ AS06/ AS10/ BA10/ ZST X

Adopting the highly expensive Qualcomm CSR8675 Bluetooth chipset, the KZ Bluetooth 5.0 Upgrade Cable offers an overwhelming wireless performance. It also supports aptX HD lossless transmission that is almost 3 times better sound transmission than ordinary chips and 1 times better performance than aptX. These cables offer faster connection, improved return connection speed and robust anti-jamming ability. The signal transmission delay of these cables is super low, thanks to the clock speed of the 120MHz level of DSP.

The bit rate of the CSR8675 chip goes up to 576kbps that is way beyond the limits of CD-quality sound leading to better connection range, faster transmission and stable performance. Additionally, it consumes about 30% less power and is 20% smaller in size than conventional CSR chips. The cables also extend support to AAC and AAC-LC coding technology for high bit rate transmission on Apple phones.

13 months of research and development has gone into the functions of the KZ Bluetooth 5.0 Upgrade Cable. This cable packs a CVC noise cancellation microphone that facilitates HD calls with advanced audio, noise suppression and cancellation. It enhances the overall call quality by eliminating noise interferences.

The industrial-grade ceramic antenna makes the KZ Bluetooth 5.0 Upgrade Cable highly sensitive to Bluetooth reception. Experience improved transmission, better gain and stability with the upgraded antenna and RF radiofrequency. Even the noise levels are significantly reduced for better Bluetooth receiving sensitivity.

With the integration of a 130mAh lithium Battery, the KZ Bluetooth 5.0 Upgrade Cable lends up to 8 hours of wireless listening along with 100 hours of standby and 2-hour fast charging. While charging the cable, kindly ensure that you use the charger with the maximum output current below 1.5A. Do not use a charger that supports fast charging to protect the device's life and your safety.

These lightweight cables are engineered to comfortably stay in your ears without falling off, all thanks to the symmetry design. While running, playing or cycling, use the KZ Bluetooth 5.0 cable as it features a waterproof IPX5 rating. With a perfect in-ear fit and an ability to resist water and sweat, these cables can be worn outdoors or at the gym.

TO POWER ON: When the cable is off, press the ► key that will trigger Blue LED lights with a voice prompt. TO PAIR: Press the ► key to start pairing mode that will trigger red and blue LED lights to flash alternately along with voice prompts.
TO POWER OFF: Press the ► key for 3 seconds that will trigger Red LED lights to flash once with voice prompts.
TO PLAY/PAUSE MUSIC: Press the ► key to pause the music while it's playing and press the same button to continue playing.
TO INCREASE VOLUME: Press the + key and soon as the volume is the highest there will be a voice prompt.
TO REDUCE VOLUME: Press the — key until mute.
TO MOVE TO THE PREVIOUS TRACK: Keep pressing — and access the previous track.
TO MOVE TO THE NEXT TRACK: Keep pressing + and access the next track. TO ANSWER: Press ► to pick up calls.
TO REJECT: Keep pressing ► to discard calls.

Kindly note that the KZ Bluetooth 5.0 cable is compatible with the KZ ZSN, ZSN PRO, ZS10 PRO, AS16, AS12, DQ6 and ZSX only. The cable is not compatible with the KZ ZST, ZSR, ED12, ES3, ES4, ZS10, AS06, AS10, BA10, ZST X.